NEC ELECTRA ELITE IPK II - Selectable Display Messaging

28
SELECTABLE DISPLAY MESSAGING
To select a message:
1. Press the Speaker key.
2. Press the Text Message key (Service Code 751: 18 + 01~20).
3. Use Volume Up or Volume Down keys to scroll through the
messages if desired.
4. For messages 1~8 and 10, enter digits to append the message if
needed.
Note: You can append messages 1-8 and 10 with digits (e.g., the time
when you will be back).
*
You enter the time in 24-hour format.
5. Press Speaker to hang up.
Note 1: Intercom calls to extensions with Selectable Display
Messaging set will receive a DND signal and receive the
display message on their telephone’s display instead of
ringing the extension.
Note 2: To allow calls to ring through and have the message
displayed on the calling extension’s display, cancel DND by
pressing DND + 0.
To cancel a message:
1. Press the Speaker key
2. Press the Text Message key (Service Code 751: 18 + 00~20)
3. Press Speaker to hang up.