NEC ELECTRA ELITE IPK II - HOLDING CALLS; System Hold; Exclusive Hold; TRANSFERRING CALLS

10
HOLDING CALLS
Note 1: To retrieve a held call, press the flashing Line key or Conf key
(internal calls).
Note 2: Calls on System Hold can be retrieved from any multiline
telephone with the held line appearance.
Note 3: After a preprogrammed time, the held call will recall to the
originating station.
TRANSFERRING CALLS
Note 1: If the called station is busy, replace the handset to initiate a
camp-on. Unanswered camp-ons and unscreened transfers will
recall to the transferring station.
Note 2: To return to the original party, press the flashing Line key or
Conf key.
Note 3: A Programmable Function Key may be assigned for DSS.
System Hold Exclusive Hold
With a call in progress:
1. Press Hold.
With a call in progress:
1. Press the Exclusive Hold
key (Service Code 751: 45).
Using Manual Dial Using Direct Station Selection
(DSS)
With a call in progress:
1. Press the Transfer key.
2. Dial the station number.
3. Announce the call
(optional).
4. Replace the handset.
With a call in progress:
1. Press the Transfer key.
2. Press the programmed
DSS.
3. Announce the call
(optional).
4. Replace the handset.