NEC ELECTRA ELITE IPK II - Speed Dial - System;Group;Station

7
Speed Dial - System/Group/Station
To dial a Station Speed Dialing number:
1. Press the Speaker key.
2. Dial #7 (default Service Code).
Note: To preselect, press a line key in step 1 (instead of Speaker).
3. Dial the Station Speed Dial buffer number (0~9).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
“ “ “ “ “
0 = Station Speed Dial buffer 10
Note 1: The stored number dials out.
Note 2: Unless you preselect, Trunk Group Routing selects the trunk
for the call. The system may optionally select a specific Trunk
Group for the call.
Note 3: If you have a DSS Console, you may be able to press a DSS
Console key to chain to a stored number.
To dial a System Speed dialing number:
1. Press the Speaker key.
2. Dial #2 (default Service Code).
- OR -
Press the Redial key.
- OR -
Press the System Speed Dialing key (Service Code 751: 27).
Note: To preselect, press a line key in step 1 (instead of Speaker).
3. Dial the Station Speed Dial buffer number (Default: 000~999).
The stored number dials out.