12
CALL PARK - SYSTEM
To Park a call in a system orbit:
Note: You can Park Intercom or trunk calls.
1. Press the Park key (Service Code 752:
*
04 + orbit).
Note: The Park key LED lights.
2. Use Paging to announce call.
3. Press Speaker to hang up.
Note: If not picked up, the call will recall to you.
- OR -
1. Press the Transfer key.
2. Dial #6 and the Park orbit (01~64).
Note: If you hear busy tone, the orbit is busy. Try another orbit.
3. Use Paging to announce call.
4. Press Speaker to hang up.
Note: If not picked up, the call will recall to you.
To pick up a parked call:
1. Lift the handset.
2. Press the Park key (Service Code 752:
*
04 + orbit).
- OR -
1. Press the Speaker key.
2. Dial
*
6 and the Park orbit (01~64).