System Hardware Manual 2 - 1
___________________________________________________________________________________
___________________________________________________________________________________
SAT End-User
Programming Chapter 2
SECTION 1PC REQUIREMENTS
This manual provides detailed information for programming using the Electra Elite
IPK/Electra Elite System Administration Terminal (SAT) End-User software.
PC requirements:
J
Pentium Processor
J
Microsoft Windows 95, 98, ME, XP, 2000 or NT 4.0 (or higher) operating system
J
At least 13 MB of free hard disk space
J
Unused PC serial communication port
J
MNP Class 4 or V.42 bis modem (if remote programming is required)
SECTION 2FEATURES OF SAT END-USER PROGRAMMING
Some of the features of SAT End-User Programming include:
Wizard – allows a user to select a feature using wizard. Wizard prompts the user to
program the necessary system data items associated with the feature. When wizard
is selected, a tabbed list of information is provided.
(For a detailed discussion of wizard, refer to Section 6 Wizard on page 2-10.)
System Data Upload/Download – allows system data to be transferred from/to a
personal computer to provide backup of data.
To Next Page
Loading...
Need help?
General
