NEC Express5800 Series - Page 189

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
189
Chapter 3 Appendix
Class
Error
code
Error message Action
UEFI 334
%1 RESTful API Error - RESTful API GET
request failed (HTTP Status Code = %2).
BIOS configuration resources were not
consumed.
Please take actions in the following order.
1. Turn off the unit, disconnect the power cord, wait 30
seconds, and then restart it.
2. If the problem persists, reset the iLO following the
procedure in Chapter 1 (7. Resetting and Clearing the
Server) in this manual.
3. If the problem persists, updating the iLO
firmware/system ROM may solve the problem. Update
the iLO firmware/system ROM.
4. If the problem persists, contact your sales
representative.
UEFI 335
%1 RESTful API Error - RESTful API PUT
request failed (HTTP Status Code = %2).
BIOS configuration resources may not be
up-to-date.
Please take actions in the following order.
1. Turn off the unit, disconnect the power cord, wait 30
seconds, and then restart it.
2. If the problem persists, reset the iLO following the
procedure in Chapter 1 (7. Resetting and Clearing the
Server) in this manual.
3. If the problem persists, updating the iLO
firmware/system ROM may solve the problem. Update
the iLO firmware/system ROM.
4. If the problem persists, contact your sales
representative.
UEFI 336
%1 RESTful API Error - One or more
configuration settings could not be applied.
Refer to the SettingsResult property of RESTful API to
check the setting contents.
If the problem persists, contact your sales
representative.
UEFI 337
%1 RESTful API Error - Unable to
communicate with %2 FW due to
Datacenter Configuration Lock being
enabled. BIOS configuration resources
may not be up-to-date.
Disable data center configuration lock.
If the problem persists, contact your sales
representative.
UEFI 338
%1 RESTful API Error - Unable to
communicate with iLO FW. BIOS
configuration resources may not be
up-to-date.
Restore the factory default settings using the Restore
Default Manufacturing Settings option via System
Configuration > BIOS/Platform Configuration
(RBSU) > System Default Options in the system utility.
If the problem persists, contact your sales
representative.
UEFI 340
NVDIMM Error - Backup Error -
Processor %1, DIMM %2
(SN:%3-%4-%5-%6). Persistent data
backup failed and data is irrecoverably lost.
Contact your sales representative.
UEFI 341
NVDIMM Error - Restore Error -
Processor %1, DIMM %2
(SN:%3-%4-%5-%6). Persistent data
restore failed and data is not available.
Data is not lost unless the issue persists.
Contact your sales representative.
UEFI 342
NVDIMM Error - Uncorrectable Memory
Error - Processor %1, DIMM %2
(SN:%3-%4-%5-%6). This NVDIMM will
not be available to the operating system
and data may have been lost.
Contact your sales representative.