NEC Express5800 Series - Page 202

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
202
Chapter 3 Appendix
Class
Error
code
Error message Action
UEFI 1943
Slot %1 Smart Array - Foreign
configuration found on drive. Not able to
import configuration to the controller.
Reconnect the hard disk drives to the controllers to
which they was originally connected.
If the problem persists, contact your sales
representative.
UEFI 1944
Slot %1 Smart Array - Foreign
configuration found on drive. Configuration
mis-match between controller and drives.
Import the configuration settings of the inserted storage,
or remove the appropriate RAID volume.
If the problem persists, contact your sales
representative.
UEFI 2150
Corrected Memory Error (%1 %2,
DIMM %3, Address 0x%4'%5, Count %6)
The action is not necessary unless the failure of
recording occurs repeatedly.
If the problem persists, contact your sales
representative.
UEFI 2200
Secure Boot - Secure Boot has been
enabled.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2201
Secure Boot - Secure Boot has been
disabled.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2202
Secure Boot - A new Platform Key (PK) has
been enrolled
Action is not necessary unless an unintended
consequence occurs.
UEFI 2203
Secure Boot - A new entry in the Key
Exchange Key (KEK) security database
has been enrolled.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2204
Secure Boot - A new entry in the db
security database has been enrolled.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2205
Secure Boot - A new entry in the dbx
security database has been enrolled.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2206
Secure Boot - A new entry in the dbt
security database has been enrolled.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2207
Secure Boot - All of the keys have been
reset to defaults.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2208
Secure Boot - Key Exchange Keys (KEK)
have been reset to the platform defaults.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2209
Secure Boot - Platform Keys (PK) have
been reset to the platform defaults.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2210
Secure Boot - db keys have been reset to
the platform defaults.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2211
Secure Boot - dbx keys have been reset to
the platform defaults.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2212
Secure Boot - dbt keys have been reset to
the platform defaults.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2213
Secure Boot - All of the keys in the platform
have been deleted.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2214
Secure Boot - The Platform Key (PK)
Secure Boot variable has been deleted.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2215
Secure Boot - The Key Exchange Key
(KEK) Secure Boot variable has been
deleted.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2216
Secure Boot - The db Secure Boot variable
has been deleted.
Action is not necessary unless an unintended
consequence occurs.