NEC Express5800 Series - Page 203

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
203
Chapter 3 Appendix
Class
Error
code
Error message Action
UEFI 2217
Secure Boot - The dbx Secure Boot
variable has been deleted.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2218
Secure Boot - The dbt Secure Boot
variable has been deleted.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2219
Secure Boot - A Key Exchange Key (KEK)
entry has been deleted from KEK
database.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2220
Secure Boot - A db entry has been deleted
from db database.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2221
Secure Boot - A dbx entry has been
deleted from dbx database.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2222
Secure Boot - A dbt entry has been deleted
from dbt database.
Action is not necessary unless an unintended
consequence occurs.
UEFI 2223
Secure Boot - Unable to enable/disable
secure boot. Only a physically present user
can enable/disable Secure Boot.
Change the settings from the local console.
UEFI 2224 Secure Boot - Unable to enroll a new entry.
Set the required settings again using the System Utility
after restoring factory default settings by selecting
System Configuration > BIOS/Platform
Configuration (RBSU) > System Defult Options -
Restore Default Manufacturing Settings options from
the menu of the System Utility. If the problem persists,
contact your sales representative.
UEFI 2225
Secure Boot - Unable to reset one or more
keys.
Set the required settings again using the System Utility
after restoring factory default settings by selecting
System Configuration > BIOS/Platform
Configuration (RBSU) > System Defult Options -
Restore Default Manufacturing Settings options from
the menu of the System Utility. If the problem persists,
contact your sales representative.
UEFI 2226
Secure Boot - Unable to delete one or
more variables.
Set the required settings again using the System Utility
after restoring factory default settings by selecting
System Configuration > BIOS/Platform
Configuration (RBSU) > System Defult Options -
Restore Default Manufacturing Settings options from
the menu of the System Utility. If the problem persists,
contact your sales representative.
UEFI 2227
Secure Boot - Unable to delete one or
more entries.
Set the required settings again using the System Utility
after restoring factory default settings by selecting
System Configuration > BIOS/Platform
Configuration (RBSU) > System Defult Options -
Restore Default Manufacturing Settings options from
the menu of the System Utility. If the problem persists,
contact your sales representative.
UEFI 2319 Test event. This is only a test. Action is not necessary.
UEFI 2400
Slot %1 SAN Error - SAN link is down. SAN
connection not possible.
Confirm the SAN switches and the configuration. Then
reconnect SAN ports or restart the server.
UEFI 2401
Slot %1 SAN Error - Fabric Login (FLOGI)
failed. SAN connection not possible.
Confirm the SAN switches and the configuration. Then
reconnect SAN ports or restart the server.
UEFI 2402
Slot %1 SAN Error - Name Server login
failed. Boot from SAN not possible.
Confirm the SAN switches and the configuration. Then
reconnect SAN ports or restart the server.
UEFI 2403
Slot %1 SAN Error - No targets found. Boot
from SAN not possible.
Confirm the SAN switches and the configuration. Then
reconnect SAN ports or restart the unit.