NEC Express5800 Series - Page 206

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
206
Chapter 3 Appendix
Class
Error
code
Error message Action
UEFI 216
DIMM Initialization Error. A fatal error was
detected while initializing memory. %1
(Major Code:%2, Minor Code:%3).
Contact your sales representative.
UEFI 217
DIMM Initialization Error - Processor %1
DIMM %2. The identified processor and
memory are operating at an incorrect
voltage. %3 (Major Code:%4, Minor
Code:%5).
Contact your sales representative.
UEFI 219
Memory Configuration Error - One or more
of the installed processors has a total
amount of memory installed which exceeds
the amount supported by that
processor. %1 (Major Code:%2, Minor
Code:%3).
Contact your sales representative.
UEFI 220
KTI Initialization Error - A fatal KTI
initialization error has been detected. %1
(Major Code: %2, Minor Code: %3).
Contact your sales representative.
UEFI 221
Unknown Initialization Error. The system
has experienced a fatal initialization
error. %1 (Major Code: %2, Minor
Code: %3).
Contact your sales representative.
UEFI 228
Unsupported DIMM Configuration
Detected - Processor %1 Channel %2.
DIMM population rule violation. The
Memory channel has been mapped out.
(Major Code:%3, Minor Code:%4).
Check and change the DIMM configuration for the rules
of the installation. For the details of the DIMM
configuration, refer to the User's Guide.
If the problem persists, contact your sales
representative.
UEFI 229
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2. The
identified DIMM is not supported in the
system. (Major Code:%3, Minor
Code:%4).
Remove the DIMM which was pointed out. For the
details of the DIMM configuration, refer to the User's
Guide. If the problem persists, contact your sales
representative.
UEFI 230
Unsupported DIMM Configuration
Detected - Processor %1 Channel %2. The
number of installed DIMM ranks exceeds
the number supported by the channel.
(Major Code:%3, Minor Code:%4).
Remove the DIMM of the memory channel which was
pointed out. For the details of the DIMM configuration,
refer to the User's Guide. If the problem persists,
contact your sales representative.
UEFI 231
Memory Configuration Error - No memory
is available. If DIMMs are installed, verify
that the corresponding processor is
installed. %1 (Major Code:%2, Minor
Code:%3).
Contact your sales representative.