NEC Express5800 Series - Page 207

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
207
Chapter 3 Appendix
Class
Error
code
Error message Action
UEFI 232
DIMM Initialization Error - A memory
initialization error was detected. %1 (Major
Code:%2, Minor Code:%3).
Contact your sales representative.
UEFI 233
DIMM Initialization Error - Processor %1
Channel %2. The identified memory
channel could not be properly trained and
has been mapped out. (Major Code:%3,
Minor Code:%4).
Contact your sales representative.
UEFI 234
DIMM Initialization Error - Processor %1
DIMM %2. The identified DIMM could not
be properly trained and has been mapped
out. (Major Code:%3, Minor Code:%4).
Contact your sales representative.
UEFI 235
Unsupported DIMM Configuration
Detected - Mixed DIMM configurations are
not support on this system. %1 (Major
Code:%2, Minor Code:%3).
Remove the DIMM which was pointed out. For the
details of the DIMM configuration, refer to the User's
Guide. If the problem persists, contact your sales
representative.
UEFI 236
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2. The
DIMM does not support the required
voltage. (Major Code:%3, Minor Code:%4).
Remove the DIMM which was pointed out. For the
details of the DIMM configuration, refer to the User's
Guide. If the problem persists, contact your sales
representative.
UEFI 237
Unsupported DIMM Configuration
Detected - Octal and Quad Rank DIMMs
are not supported on the same memory
channel . (Major Code:%1, Minor
Code:%2).
Check and change the DIMM configuration for the rules
of the installation. For the details of the DIMM
configuration, refer to the User's Guide. If the problem
persists, contact your sales representative.
UEFI 238
Unsupported DIMM Configuration
Detected - Mixing octal rank LRDIMMs with
non-octal rank LRDIMMs is not
supported. %1 (Major Code:%2, Minor
Code:%3).
Check and change the DIMM configuration for the rules
of the installation. For the details of the DIMM
configuration, refer to the User's Guide. If the problem
persists, contact your sales representative.
UEFI 239
Unsupported DIMM Configuration
Detected - Mixed DIMM configurations are
not supported on this system. The
system can only have one DIMM type
(such as RDIMM or LRDIMM) installed at a
time. %1 (Major Code:%2, Minor
Code:%3).
Referring to the user’s guide, change the mounting
positions or number of DIMM.
In case a problem is not resolved, contact your sales
representative.
UEFI 242
Unsupported Processor Configuration
Detected - System does not support
booting with three processors installed.
Make sure the processor is properly installed. If the
problem persists, contact your sales representative.
UEFI 243
Unsupported Processor Configuration
Detected - The installed processors are not
4-socket capable and this server only
supports 4-socket capable processors.
Make sure the processor is properly installed. If the
problem persists, contact your sales representative.