5. Using Remote Management
OVERVIEW
The BMC Web Server function allows you to control the host system’s power and KVM from
a remote console via a Web browser.
Part of the above function is implemented by Java Applet.
CONNECTING TO THE WEB SERVER
Access the following URL from the Web browser on the remote management PC:
http://BMC_HostPort or https://BMC_HostPort
The “BMC_HostPort” URL includes the BMC’s IP address or host name
and a colon followed by a port number for HTTP or HTTPS connection:
e.g. 192.168.1.1:80 If the port number is 80 for HTTP or 443 for HTTPS
(default), you may omit the port number.
For security reasons, you are recommended to use HTTPS (SSL)
connection. For better communication performance, use HTTP on a
secured network.
When you connect via SSL, security warning messages may appear.
- 15-
To Next Page
Loading...