NEC ITK-24CG Series User Manual

92
1.
Note: There are three pre-installed melodies on the DT900
telephones. They include: Download 1: C major ringtone,
Download 2: Canon and Download 3: Turkish March.
These pre-installed melodies are overwritten when you
download a new ringtone.
Note: When selecting Automatic or not performing this
ringer tone setting, Tone Type 1 is automatically applied.
Note: When selecting Automatic, the preview function will
not operate. Also, when selecting Download 1/2/3, the ringer
tone file must be downloaded in advance. If there is no
downloaded file, you hear no tone.
Note: Tone Type 1 to Tone Type 8:
In the preview function, each ringer tone sounds
continuously. Actual ringer pattern of each tone is
determined by the initial system settings.
Note: Terminal settings may not become effective,
according to the system settings. For details, contact the
System Administrator.
To Set Illumination Pattern for Call Indicator
Lamp
The procedure below shows how to set the illumination
pattern (color of Call Indicator Lamp).
(1) Display the Menu screen, select Settings.
(2) Select User Settings.
(3) Select Incoming Call.
(4) Select Illumination.
(5) Select External Call or Internal Call.
(6) Select a desired illumination pattern.
To Enable/Disable RTP Alarm
The procedure below shows how to enable/disable
RTP alarm. The RTP Alarm allows the terminal user to
be notified that the voice packet was not received in a
certain period of time because of network delay etc.
(1) Display the Menu screen, select Settings.
(2) Select User Settings.
(3) Select Talk.
(4) Select RTP Alarm.
(5) Select Automatic, Disable or Enable
(see the following table).
13 Tone Type 13 – Melody 4
14 Tone Type 14 – Melody 5
15 Download 1 –
C Major Ring Tone
(See note below.)
16 Download 2 –
Canon
(See note below.)
17 Download 3 –
Turkish March
(See note below.)
TIP
The enabled item is highlighted.
TIP
You can set the ringer tone for the telephone here.
Ringer Tone type can be set for Name, Group and
Telephone set. The ringer Tone type set for Name
has higher priority than the types set for Group and
Terminal set.
No. Menu Item
Frequency (Hz)
Remarks
1st 2nd
Menu Items Description
0 Automatic
Follow the system settings. If no setting is
made in the system, the default setting
(Alarm=ON) is applied.
1 Disable Follow the terminal settings (OFF).
2 Enable Follow the terminal settings (ON).
1
1
4
1
2
1
2
1
0
1
2

NEC ITK-24CG Series Specifications

General

Brand	NEC
Model	ITK-24CG Series
Category	Telephone
Language	English