NEC ITK-24CG Series User Manual

115
1.
while station is ringing.
(3) Press VOICE. Speak to called party.
Three-Party Conference
(1) While Station A and Station B are engaged in a
Two-party connection, Station A presses Conf
softkey.
Station A hears Special Dial Tone.
Station B hears the music on hold.
(2) Station A dials a desired Station Number (Station
C).
(3) After Station C answers the transferred call,
Station A presses ADD softkey.
(4) Station A presses the Begin softkey.
(5) Three-Party call is now established.
Voice Mail System
❍ Originate
Press the VMsg softkey.
DND (Do Not Disturb)
This feature restricts incoming calls to a terminal.
To Set DND
(1) Press the Speaker key.
The Call Indicator lamp goes off.
The Speaker key lamp lights red.
The Line key lamp lights green.
(2) Press Soft key (>>>>) when Soft key is used.
(3) Press Soft key (DND) or DND feature key.
(4) Press the Speaker key.
The Speaker key lamp goes off.
The Line key lamp goes off.
Voice
MW VMsg
3-18 TUE 8:30AM

STA 101
CALLING
Conf
STA 101
TALKING TO
Station Number
of Station C
ADD
3-18 TUE 8:30AM
STA 105
TALKING TO
Rls
Station Number
of Station C
Begin
3-18 TUE 3:49PM
CONF
ICM Dial
DIR
This feature is set by Soft key or feature key. The
feature key is set using system data setting at
initial installation. For details, contact the system
administrator.

NEC ITK-24CG Series Specifications

General

Brand	NEC
Model	ITK-24CG Series
Category	Telephone
Language	English