137
8. DIRECTORY OPERATION
This chapter explains the DT930 Directory features.
Add New Data
(1) Press the key.
When the menu screen is displayed. Select
Directory then press
(Enter) or OK softkey
(or press the 2 key)
Or, press the following softkeys in the order listed:
↓ Prog ↑ TELBK).
(2) Select : REGIST and then press
(Enter)
or press
key.
(3) Select Name or Telephone Number by using
Alphabet or Num softkey to toggle between the
two.
(4) Enter a name or telephone number to be
registered in the directory using the dial pad.
(5) After entering the name or telephone, press the
key.
Note: The Feature key can be used to backspace and
delete a character.
(6) The following list appears. Select a desired group
by entering a number.
(7) Enter the telephone number as indicated in the
display and press the key.
(8) Enter a desired Memory ID.
(9) After entering the Memory ID, the display goes
back to the main directory screen. Press the Exit
key.
1: REGIST
2: SEARCH
3: SETTING
4: DeleteAll
1: 2: 3: 4:
TLBK1: INPUT NAME
<
NUM
[A]
ï‚¬ï€ ï€ ï€ ï€ ï€ ï€ ï€ ï€ ï€ ï€ ï‚®
TLBK1: SELECT GROUP
1 :GROUP 01
3 :GROUP 03
2 :GROUP 02
4 :GROUP 04
TLBK1: INPUT NUMBER
NEC
2142622000
TLBK1: REGIST MEMORY
>000
[0-299]