99
To Download a File
You can download files for Music on Hold, Ringer Tone,
and Wallpaper.
When downloading these files, the DT930 needs to be
connected to the network that has FTP/TFTP/HTTPS
server.
Note: For details on the FTP/TFTP/HTTPS service, contact
the System Administrator.
Before starting the download, the IP Address of the
FTP/TFTP/HTTPS Server must be entered from
DT930.
(1) Set up the FTP/TFTP/HTTPS server.
<FTP server>
Put the downloading file into the designated
directory (for Windows IIS, the default is
“C:\InetPub\ftproot”) of the FTP server.
<TFTP server>
Put the downloading file into a desired directory of
TFTP server and specify it as the directory for
downloading.
<HTTPS server>
Put the downloading file into a desired directory
of the HTTPS server and specify the directory for
downloading.
Note: Refer to the DT Resource Manual for HTTPS
server.
(2) Display the Menu screen, select Settings.
(3) Select Download.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(4) Select Protocol.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(5) Choose a protocol used by the server which
stores the download file.
Select an item by one of the following operations.
❍ Highlight an item by using , and press or
OK.
❍ Press , or , and press or OK.
(6) The display returns to the Download Menu
screen.
TIP
When the password entry ends in failure, the
following error message is issued. In that case, press
OK and make a retry.