102
(23) When the downloading process completes, the
following is displayed.
(24) The display returns to the Download Files
screen upon Exit.
Note: When the downloading process ends in failure,
Downloading Failed! is displayed on the LCD. Check
the following and retry.
Backup or Restore the Settings Data
of the Terminal
This section explains how to make a backup of the
settings data which has been entered in the terminal to
FTP/TFTP/HTTPS server. The data in the FTP/TFTP/
HTTPS server can also be restored to the terminal.
To Backup the Settings Data of the Terminal
(1) Display the Menu screen, select Settings.
(2) Select Data Backup/Restore.
(3) Select Protocol.
(4) Choose a protocol type of the server which will
sore the Backup file.
(5) According to the selection in [Protocol] screen,
proceed with the following steps below.
(6) Display the Menu screen, select Settings.
If FTP is selected, continue to with STEP 7.
If TFTP is selected, proceed to
STEP 13.
If HTTPS is selected, proceed to
STEP 7.
(7) Select Account Settings.
(8) Select User ID.
Check Points Actions
Download file is not placed in
the specified directory.
Place the download file in the
specified directory.
A different file name is
specified between DT930 and
FTP/TFTP/HTTPS server.
Set the same file name from
both DT930 and FTP/TFTP/
HTTPS server.
Incorrect IP address of FTP/
TFTP/HTTPS server has been
entered from the telephone.
Set the proper IP address of
FTP/TFTP/HTTPS server.
The power to FTP/TFTP/
HTTPS server or network
equipment is Off.
Turn On the power.
LAN cable is disconnected. Reconnect the cable securely.
When downloading theses files, the terminal
needs to be connected to the network that has
FTP, TFTP or HTTPS server.
For details about the FTP/TFTP/HTTPS service,
contact the system administrator.
To Next Page
Loading...
Need help?
General