NEC ITK-24CG Series User Manual

61
1.
(5) Enter the new password.
After entering the new password, press or
Set.
(6) Enter the new password again.
After entering the retry password, press or
OK.
Note: A maximum of 32 digits (0-9, * and #) can be
used when setting a new password.
(7) When the password entry completes
successfully, the display changes as follows.
❍ Press or OK.
TIP
When the password entry ends in failure, the
following error message is issued. In that case, press
OK and make a retry.

NEC ITK-24CG Series Specifications

General

Brand	NEC
Model	ITK-24CG Series
Category	Telephone
Language	English