NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - TO ENABLE;DISABLE VOLUME LEVEL DISPLAY

54
• TO ENABLE/DISABLE RTP ALARM
The procedure below shows how to enable/disable
RTP alarm.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
Note:
You can set illumination pattern for the telephone
set here. Illumination pattern can be set for
"Name", "Group" and "Telephone set". The illumi-
nation pattern set for "Name" has higher priority
than the patterns set for "Group" and "Terminal
set".
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
DT730/DT710
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu
↓
User Setting