NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - Page 63

55
STEP 3: Select Talk.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select RTP Alarm.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Select Automatic, Disable or En-
able (see the following table).
Select an item by either of the following operations.
• Highlight an item by using , and then press
or OK soft key.
• Press - key, and then press or OK soft
key.
2
2
1
2
Display
[User Setting]
3
4
5
6
7
Change Password
Peripherals
OKBack
↓
Security
Incoming Call
Talk
↓
Usability
1
1
1
2
[Talk]
3
4
5
OKBack
↓
DTMF Tone
Key Touch Tone
Hold Music
Prefix
RTP Alarm
0
1
2
Menu Items Descriptions
0 Automatic
Follow the setting on the System.
If no setting is made in the Sys-
tem, the default setting
(Alarm=ON) is applied.
1 Disable
Follow the setting on the terminal
(OFF).
2 Enable
Follow the setting on the terminal
(ON).
Note:
For the setting on the System, contact the Sys-
tem Administrator.
Note:
The enabled item is highlighted.
0
2
0
1
[RTP Alarm]
2
Automatic
OK
Back
Disable
Enable
↓