NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - TO SET SCREEN SAVER

56
• TO ENABLE/DISABLE DTMF TONE
The procedure below shows how to enable/disable
DTMF Tone.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Select Talk.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select DTMF Tone.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
DT730/DT710
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu
↓
User Setting
2
2
1
2
Display
[User Setting]
3
4
5
6
7
Change Password
Peripherals
OKBack
↓
Security
Incoming Call
Talk
↓
Usability
2
2
1
2
[Talk]
3
4
5
OKBack
↓
Key Touch Tone
Hold Music
Prefix
RTP Alarm
DTMF Tone
↓