57
STEP 5: Select Automatic, Disable or En-
able (see the following table).
Select an item by either of the following operations.
• Highlight an item by using , and then press
or OK soft key.
• Press - key, and then press or OK soft
key.
• TO SET KEY TOUCH TONE
The procedure below shows how to set Key Touch
Tone. Key Touch Tone is a tone generated when the
digit keys are pressed while DT Series is off-hook.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Select Talk.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
Menu Items Descriptions
0 Automatic
Follow the setting on the System.
If no setting is made in the Sys-
tem, the default setting
(DTMF=ON) is applied.
1 Disable
Follow the setting on the terminal
(OFF).
2 Enable
Follow the setting on the terminal
(ON).
Note:
For the setting on the System, contact the Sys-
tem Administrator.
Note:
The enabled item is highlighted.
To Next Page
Loading...
