NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - Page 81

73
STEP 6: Enter the new password again and then
press or OK soft key.
STEP 7: When the password entry completes suc-
cessfully, the display changes as follows.
Press
or OK soft key.
Note:
A maximum of 32 digits (0-9, * and #) can be set
as a password.
[Change Password]
OKCancel
SetBK
1
Old Pass
Retry Pass
****
New Pass
[Change Password]
OKCancel
Set
BK
1
Old Pass
****
New Pass
Retry Pass
****
Note:
When the password entry ends in failure, the fol-
lowing error message is issued. In that case,
press OK soft key and try again.
[Password]
OK
1
Complete
[Password]
OK
1
Password Error