81
STEP 18:Select a file to be downloaded.
STEP 19:When Ring Tone is selected at STEP 18,
the following Ring Tone screen is displayed.
Select either Download1, Download2
or Download3.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press - key.
STEP 20:The default file name will be displayed.
- When downloading a file for Music on Hold, the
default file name is “MOH.wav”.
- When downloading a file for ringer tone, the
default file name is “Melody1/2/3/.wav”.
When downloading a file
for Music on Hold
:Select Hold Music and go
to STEP 20.
When downloading a file
for ringer tone
:Select Ring Tone and go
to STEP 19.
When downloading a file
for directory
:Select Directory and go
to STEP 20.
Note:
DT710 can select 1 Hold Music only.
To Next Page
Loading...
