82
- When downloading a file for Directory, the default
file name is “Directory.csv”.
When changing the file name, go to the next
step (STEP 21).
When not changing the file name, go to
STEP 22.
STEP 21:Press BK soft key once to delete the default
file name and then enter a new file name by
using the digit keys.
STEP 22:Press or Exec soft key to start the down-
loading process. While downloading a file,
the LCD displays “Downloading...” first and
then “Saving...”.
STEP 23:After the downloading process is complete,
the display changes as follows:
The display goes back to the Download
Files screen by Exit soft key.
File Format Maximum Size
PCM
µ-law 8kHz/s wav. under 32 seconds
File Name Directory.csv (Fixed)
Code Unicode (UTF-8)
Note:
For details on character entry method, see HOW
TO INPUT CHARACTERS in chapter 4 Basic
Operation.
Note:
A maximum of 20 characters ("0-9", "A-Z", "a-z",
"*", "#", ".", "-" or "_") can be entered as a file
name.
Note:
To delete an entered character, press BK soft
key.
Note:
Be sure not to turn OFF the DT700 Series while
"Saving..." is displayed on the LCD.
Note:
When the downloading process ends in failure,
"Downloading Failed!" is displayed on the LCD.
Check to see the following and then retry.
To Next Page
Loading...
