NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - Page 92

84
• TO BACKUP PERSONAL SETTINGS
DT730\DT710 Series user can backup personal
settings of DT Series to FTP/TFTP server. To back up
the setting data, the DT Series needs to be connected
to the network that has FTP (TFTP server).
Before starting the backup, an IP Address of the FTP/
TFTP Server must be entered from DT Series.
STEP 1: Set up the FTP/TFTP server.
<FTP server>
Confirm the designated directory (for Win-
dows IIS, the default is “C:\InetPub\ftproot)
for the backed up file.
<TFTP server>
Specify a desired destination directory for the
backed up file.
STEP 2: Display the Menu screen, and select Setting.
STEP 3: Select Data Backup/Restore.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Protocol.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Select a protocol used by the destination
server.
Select an item by either of the following operations.
• Highlight an item by using , and then press
or OK soft key.
• Press or key, and then press or OK soft
key.
Note:
For details on the FTP/TFTP service, contact the
System Administrator.
DT730/DT710
3
3
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
1
2
[Setting]
3
OKMenu
User Setting
Download
↓
Data Backup/Restore
4
4
1
2
[Backup/Restore]
3
4
OKBack
↓
Data Backup
Data Restore
↓
Server Address
5
FTP Settings
Protocol
1
2