NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - Page 93

85
STEP 6: The display goes back to the Backup/Re-
store screen.
When FTP is selected here, go to the
next Step (STEP 7).
When TFTP is selected here, go to the
next STEP 15.
STEP 7: Select FTP Settings.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 8: Select User ID.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 9: Enter a User ID by using digit keys, then
press or OK soft key.
STEP 10:The display goes back to the FTP Settings
screen. Select Password.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
1
2
[Protocol]
OK
Back
TFTP
↓
FTP
1
2
5
5
1
2
[Backup/Restore]
3
4
OKBack
Data Backup
Data Restore
↓
Server Address
5
Protocol
FTP Settings
1
Note:
For details on character entry method, see HOW
TO INPUT CHARACTERS in chapter 4 Basic
Operation.
1
1
2
[FTP Settings]
3
OKBack
↓
Password
Folder
User ID
[User ID]
OKBack
BK
A
Input a user ID.
2
2