CONTROLS
”SELECT”: To display OSM windows, mode changes, or activate the degaussing or OSM window
color selection.
CONTROL BUTTON (-,+): Without OSM — Adjust the contrast.
With OSM — Select icon and adjust.
”RESET”: Return the adjustment item to the factory setting.
Power indicator LED: The LED indicate Power management state.
POWER SWITCH: Push/push to turn the monitor on and off.
Power input: To connect with the power cord.
Signal input with the captive cable: To connect with personal computers’ analogue RGB output.
MultiSync V520
To Next Page
Loading...
Need help?
General