NEC NEAX 2000 IPS - Configuration Guide; Figure 2-8; Figure 3-2 PIMMD Face Layout; Figure 6-8

NEAX 2000 IPS Configuration Guide
Page 26 NDA-24347, Issue 1
Modules Chapter 3 Module and Installation Hardware
Figure 3-2 shows the face layout of the PIMMD.
Figure 3-2 PIMMD Face Layout
Slot 00 - Slot 11
• Line/Trunk circuit card mounting slots
• Slot 00 - Slot 07: All Line/Trunk circuit cards can be mounted.
• Slot 08 - Slot 11: 4-port circuit cards can be mounted only when 8-port cards
are not mounted in the slot 04 to 07.
• Application circuit card mounting slots
• Slot 00 - Slot 11: All application circuit cards can be mounted.
• MP/FP: PN-CP24-A/PN-CP15 mounting slot
• AC/DC power: PZ-PW121 mounting position
• DC/DC (-48 V) power: PZ-PW122 mounting position
Note 1: When the system is comprised of three PIMs or more, FP is required. FP is
mounted in Slot 12 of PIM 2, PIM 4 and PIM 6.
Note 2: When an 8-port card is mounted in Slot 04-07, Slot 08-11 can only be mounted
with the AP cards.
Note 3: Only 8PFT card can be mounted in this space. Other cards cannot be
mounted.
Note 4: It is recommended that the LT00 slot should be used to mount the PZ-VM00-M
(AD-8) card, if provided.
00
01
02 03
04
05 06
07
08 09
10
11
12
8-Port Card Mounted
4-Port Card Mounted
8 8 8 8 8 8 8 8 0 * 0 * 0 * 0*
4 4 4 4 4 4 4 4 4 4 4 4
*Note 2
AC/DC
Power
DC/DC
-48 V
Vacant
Space
AD-8
for
M
P
/
F
P
Note 1
8
P
F
T
Note 3
Number of ports available per slot