NEAX 2000 IPS Configuration Guide
Page 40 NDA-24347, Issue 1
Card Location Chapter 4 Circuit Cards
Note 3: 4BRT
The 4BRT card can be mounted in Slot 00 to Slot 11 of PIM 0 to PIM 7. When
4BRT is mounted in Slot 08-11, the last two circuits are connected from the
front side of the 4BRT card. The connection is made with connector attached
with 4BRT card. (232D-04S1B-DA5)
00 01 02 03 04 05 06 07 08 09 10 11 12
M
P
Installation cable is inserted from BWB For the first two circuits, the
installation cable is inserted
from BWB. For the last two
circuits, the cable is inserted
from front side via connector.
To Next Page
Loading...
