1 Getting Started
– 10 –
1-4 Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at
the projector. Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the
remote will function well within a radius of about 7 meters (23 feet) and 30 degrees above or below the projector level.
If the projector does not respond to the remote control, move a little closer.
1-5 Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the top of the projector. All operations can
be carried out with the remote control; however, the buttons on the projector are limited in use.
To Next Page
Loading...
