NEC P506QL - Standby Mode

3 On-Screen Display (OSD) Menu Settings
– 41 –
STANDBY MODE
Press the MENU button to open the OSD menu. Press  to move to the SETUP menu. Press  to move to the
STANDBY MODE menu and then press Enter or . Press  to move up and down in the STANDBY MODE menu.
ITEM
DESCRIPTION
STANDBY MODE
Press the cursor  button to select the standby mode.
The options are NORMAL, NETWORK STANDBY and HDBaseT
AUTO POWER OFF
Press the cursor  buttons to set the Auto Power Off timer. The projector automatically
turns off if no input source is detected after the preset period of time.
OFF TIMER
Press the cursor  button to enter and set Sleep timer. The projector automatically turns
off after the preset period of time.