NEC PA600X - Page 200

188
8. User Supportware
3 InputthestartingpasswordofDesktopControlUtility1.0,andclick[OK].
The “Current password” window will be displayed.
NOTE:
ThecharacterstringdisplayedinthepasswordeldvarieseachtimeDesktopControlUtility1.0isstarted.
4 Writedownthecharacterstringdisplayedinthepasswordeld.
Write down “PMHN” in the screen example of step 3.
5 Click[OK].
Desktop Control Utility 1.0 will be started.
Move to the room where the projector is installed, with the paper on which you have written down the password in
step 4.
Downloaded From projector-manual.com NEC Manuals