2
1. Introduction
Attaching/Removing the Dust Cap
To remove the dust cap from theprojector, push the
tongueatthetopleftoutwardandpulltheknobatthe
centerofthecap.
Toattachthedustcaptotheprojector,locatethecatchon
thelowerendofthedustcapandplaceitintotheopen-
ingoftheprojectorwiththepointofatrianglemark(▽)
facingdownward(①inthegurebelow),andthenpush
theupperendofthedust cap against the projectorto
placethecatchesintotheslotwhileclutchingthehandle
(②inthegurebelow).