NEC PX803UL-WH - ❷ Mounting the Optional Board (Sold Separately)

175
9. Appendix
❷ Mounting the Optional Board (sold separately)
CAUTION
Beforemountingorremovingtheoptionalboard,besuretoturnofftheprojector,waitforthefanstostopandturn
offthemainpowerswitch.
Toolneeded:Phillipsscrewdriver(plus-head)
1. Turnoffthemainpowerswitchoftheprojector.
2. LoosenthetwoscrewsontheSLOTcoverofthe
terminals.
 RemovethetwoscrewsandtheSLOTcover.
NOTE:
• Keepthetwoscrewsandtheslotcover.
3. Insert the optional board into the slot.
 Makesurethattheboardisinsertedintotheslotinthe
correctorientation.
 Incorrect orientation may cause miscommunication
betweentheoptionalboardandprojector.