NEC PX803UL-WH - Setting the Overlap of Projection Screens

4. Multi-Screen Projection
73
Preparation:
• Turnontheprojectoranddisplayasignal.
• Whenperformingsettingsoradjustmentsusingtheremotecontrol,enablethe[CONTROLID]soasnottoactivate
theotherprojectors.(→page125)
Setting the overlap of projection screens
①
Enable[EDGEBLENDING].
1. Press the MENU button.
 Themenuwillbedisplayed.
2. Select[EDGEBLENDING].
 The[EDGEBLENDING]screenwillbedisplayed.Alignthecursorwith[MODE]andthenpresstheENTERbutton.
Themodescreenwillbedisplayed.
3. Select[MODE]→[ON]andpresstheENTERbutton.
 ThisenablestheEdgeBlendingfunction.Thefollowingmenuitemsareavailable:
 [TOP],[BOTTOM],[LEFT],[RIGHT],and[BLACKLEVEL]
4. Select[RIGHT]forProjectorAand[LEFT]forProjectorB.
 PresstheENTERbutton.
 Thefollowingitemsareavailable:
 [CONTROL],[MARKER],[RANGE],and[POSITION]