EasyManua.ls Logo

NEC PX803UL-WH - Page 205

NEC PX803UL-WH
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
188
9. Appendix
LIGHT Indicator
Indicatordisplay Projectorstatus Procedure
Off
Thelightmoduleis
turnedoff.
Flashing
Red(sixtimes
percycle)
Thelightsourceisnot
turnedon.
Waitforover1minuteandtrytopowerONtheprojector
again.Iftheproblemstillpersists,contacttheNECprojector
customersupportcenter.
Lit Green Lightmodulelit
TEMP.Indicator
Indicatordisplay Projectorstatus Procedure
Off
Noproblem
Flashing Red(cycles
of2)
Temperatureproblem Thetemperatureprotectorhasbeenactivated.Iftheroom
temperatureishigh,movetheprojectortoacoolplace.If
theproblemstillpersists,contacttheNECprojectorcus-
tomersupportcenter.
Lit Orange Highsurroundingtem-
perature(ForcedECO
Mode)
The surrounding temperature is high. Lower the room
temperature.
If the temperature protector is activated
Iftheprojector’sinternaltemperaturerisesabnormally,thelightmoduleturnsoffandthetemperatureindicatorashes
(repeatedlytwoashespercycle).
Itmayhappenthattheprojector’stemperatureprotectorissimultaneouslyactivatedandtheprojector’spowerturnsoff.
Ifthishappens,dothefollowing:
- Unplugthepowercordfromthepoweroutlet.
- Ifusinginaplacewherethesurroundingtemperatureishigh,movetheprojectortoadifferent,coolplace.
- Ifthereisdustintheventilationslits,clean.(page159)
- Waitassuchabout1hourfortheprojector’sinternaltemperaturetolower.

Table of Contents

Related product manuals