NEC QX-S5500G Series - Page 132

Installation Guide
QX-S5500G Series Ethernet Switches
9. Appendix B FRUs and compatibility matrixes
9-6
Table 9-2 The port LED of QSFP+ description
LED status Description
Steady green
A transceiver module is normally installed on a port. The port has a link and is operating at
40 Gbps.
Flashing green
The port is sending or receiving data at 40 Gbps.
Steady yellow
A transceiver module is normally installed on a port. The port has a link and is operating at
10 Gbps.
Flashing yellow
The port is sending or receiving data at 10 Gbps.
Off
No link is present on the port.
II. LSWM5SP2PM
(1) SFP+ port LED
(2) SFP+ port
(3) Screw
(4) Ejecting lever
Table 9-3 The port LED of SFP+ description
LED status Description
Steady green
A transceiver module is normally installed on a port. The port has a link and is operating at
10 Gbps.
Flashing green
The port is sending or receiving data at 10 Gbps.