NEC SL1100 - Figure 2-110 Setting for High Position; Figure 2-111 Leg Setting for High Position

5.1.2.2 High position setting
1. Turn telephone over (button side down).
2. Pull up the Leg Stoppers.
Leg
Leg Stopper
Figure 2-110 Setting for High Position
3. Adjust the leg to desired height.
Leg
< High position >
Figure 2-111 Leg Setting for High Position
4. Lead the Line and Handset cords through the applicable grooves.
(Refer to Figure 2-109 Cabling of Multiline Telephone on page 2-78)
ISSUE 6.0 SL1100
Hardware Manual 2-79