NEC SL1100 - Wall-Mounting the DSS Console; Figure 2-122 High Position Setting; Figure 2-123 Cabling for Wall-Mount

3. Adjust the leg to desired height.
< High position >
Leg
Figure 2-122 High Position Setting
4. Lead the Line cord through the applicable grooves.
(Refer to Figure 2-120 Cabling of DSS on page 2-84)
5.3.2 Wall-Mounting the DSS Console
1. Lift the leg and lead the cable through the applicable grooves. Refer to Figure 2-123 Cabling for
Wall-Mount on page 2-85. Lower leg to stowed position.
< Bottom view>
Leg
Figure 2-123 Cabling for Wall-Mount
ISSUE 6.0 SL1100
Hardware Manual 2-85