NEC SL1100 - Figure 2-64 Mounting the 1 St Expansion Interface Card

4. Insert two Nylon-spacers into the specified holes, and fasten two Metal-spacers into the specified
holes. (Both Nylon and Metal spacers are provided with 080E/008E/000E/1PRIU)
If no more Expansion Interface cards are to be mounted on the 1st PCB, fasten two screws to
secure the 1st PCB on the top of the 080E/008E/000E/1PRIU.
Expansion Interface Card
(1st PCB)
J21
J1
Nylon-Spacers
Metal-Spacers
Screw position
1st EXP.
PCB
Both sides are
the same.
Screws
Figure 2-64 Mounting the 1st Expansion Interface Card
ISSUE 6.0 SL1100
Hardware Manual 2-45