NEC SL1100 - Figure 4-16 Removing the Main-Cover; Figure 4-17 Inserting the CF Card

3. Loosen two screws and remove the Main-Cover.
Two screws
Hooks
Main-Cover
Figure 4-16 Removing the Main-Cover
4. Insert the CF card (with the new main system software loaded) to the CF slot on PZ-VM21
daughter board. (PZ-VM21 should be temporary installed if not already fitted.)
CPU card
CF Slot (CN2)
CF card
PZ-VM21 PCB
D3 (Red)
D1 (Blue)
D2 (Red)
D4 (Red)
D5 (Red)
Figure 4-17 Inserting the CF card
ISSUE 6.0 SL1100
Hardware Manual 4-11