EasyManua.ls Logo

NEC SL1100 - Installing the DT330 Terminals and Options (V4.0 or Higher); Connecting the DT330 Terminals and Options to the System; Special Notes; Table 2-32 Terminal Power Factor

NEC SL1100
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CS55 DECT 6.0 technology
CS70N DECT 6.0 technology
CS351N DECT 6.0 technology
CS361N DECT 6.0 technology
Voyager 510 Bluetooth technology
Some of the above models are sold with and without the Plantronics Handset Lifter.
Refer to www.plantronics.com for details.
The SL1100 Telephone must be equipped with the NEC WHA (Wireless Headset Adapter – P/N
BE113158).
5.10 Installing the DT330 terminals and options (V4.0 or higher)
5.10.1 Connecting the DT330 terminals and options to the system
Refer to SV8100 System H/W Manual for installing DT330 digital multiline terminals.
5.10.2 Special Notes
The DTL-12BT-1P TEL require local AC power.
In case of power failure mode, DT330 multiline terminal does not work even though the Built-in
Battery is connected.
DT330 terminal does not supported the Bottom/Side/Handset options. BCH adapter is not
supported.
The DT330 Multiline Terminal can be connected according to the following terminal power factor. Do
not connect more than this value.
Table 2-32 Terminal Power Factor
Terminal Power Factor
1 KSU = < 24
Item Power Factor
IP4WW-12/24TXH-B-TEL (BK/WH) 1
DTL-12/24D-1P TEL (BK/WH) 1.5
DTL-12BT-1P TEL (BK) 3.5
Table 2-33 Maximum Number of Terminal installed
Terminal (Power Factor) Maximum Number of Terminal installed Remarks
1KSU 2KSU 3KSU
IP4WW-12/24TXH-B-TEL (1) 24 48 72
DTL-12/24D-1P TEL (1.5) 16 32 48
DTL-12BT-1P TEL (3.5) 6 12 18
SL1100 ISSUE 6.0
2-96 Installation

Table of Contents

Other manuals for NEC SL1100

Related product manuals