NEC SL1100 - External Paging Output Specifications; Bgm;Exmoh Source Input Specifications; External Sensor Device Interface Specifications; CPU Card LAN Port Specifications

Item Specification
Rated Current DC 320 mA Maximum
Contact Normally Open
2.16 External Paging Output Specifications
Table 5-11 External Paging Output Specifications
Item Specification
Output Impedance 600 Ω @ 1 kHz
Output Level Nominal 250 mV (-10 dBm)
Maximum Output 400 mV RMS
2.17 BGM/ExMOH Source Input Specifications
Table 5-12 BGM/External MOH Source Input Specifications
Item Specification
Output Impedance 600 Ω @ 1 kHz
Input Level Nominal 250 mV (-10 dBm)
Maximum Input 1 V RMS
2.18 External Sensor Device Interface Specifications
Table 5-13 External Sensor Device Interface Specifications
Applied Voltage during
Sensor Off
Loop Current during Sensor
On
Port Assignment
24 V
40 mA
Program10-03-05: 0
5 V Program10-03-05: 1
The External Sensor device configuration shall be assigned by system program and the programming
is different with a Sensor Type.
2.19 CPU Card LAN Port Specifications
Table 5-14 CPU Card LAN Port Specifications
Item
Specification
Standard IEEE802.3 10Base-T and 100Base-TX Compliant
Access CSMA/CD
I/F (Layer 1) Speed: 10 Mbps/100 Mbps Auto Negotiation
Cable: CAT5 or better, Straight/Cross Auto Crossover
SL1100 ISSUE 6.0
5-8 Specifications