NEC SV9100 - Presence and Status Messages; Setting Your Presence; Entering a Status Message

Page5of60

Call Forwarding (continued)
To set Call Forward – Both Ring at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Both Ring Service Code (default: 745).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
3. Dial 1 (Set).
4. Dial the destination extension number.
5. Press Speaker or hang up.
The Call Forwarding Programmable Function Key turns on.
To cancel Call Forward – Both Ring at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Both Ring Service Code (default: 745).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
3. Dial 0 (Cancel).
4. Press Speaker or hang up.
The Call Forwarding Programmable Function Key turns off.