NEC SV9100 - Page 9

Page6of60

Call Forwarding (continued)
To set Call Forward – Follow Me from the destination station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Follow Me Service Code (default: 746).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
3. Dial 1 (Set).
4. Dial the station number to be forwarded and then the destination number.
5. Press Speaker or hang up.
The Call Forwarding Programmable Function Key goes on.
To cancel Call Forward – Follow Me from the destination station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Follow Me Service Code (default: 746).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
3. Dial 0 (Cancel).
4. Dial the station number, which is forwarded, or 0 to cancel all extensions.
5. Press Speaker or hang up.
The Call Forwarding Programmable Function Key turns off.