6-2 Software Maintenance
SVP Server Installation, Setup, & Maintenance Manual - Revision 1
Lock the SVP Server in the SVP-II Configuration window
(Figure 4-3 on page 4-7) prior to updating the software. Reset the
SVP Server after the system is locked.
NOTE
Note that locking the SVP Server will prevent new calls from starting. All
calls in progress will be terminated when the SVP Server is reset.
REFERENCE
Refer to “SVP Server Configuration” on page 4-6 for more information
about locking the SVP Server.
To Next Page
Loading...
Need help?
General