6
• HOW TO CHARGE THE BATTERY
Be sure to charge the battery when using the phone for
the first time. Use one of the following:
•Cradle
• PC via USB cable
• AC adapter (direct connection)
By using the Cradle:
The phone can be charged by using the cradle. You can
also charge the battery by inserting the battery pack
alone to the slot on the cradle. This is useful when you
have a spare battery.
(1) Insert the AC adapter plug into the jack in the
bottom of the cradle.
(2) Plug in the AC adapter to an appropriate outlet.
(3) Place the phone and/or the spare battery pack as
shown below. When placing a battery pack into the
slot, insert it so that the label may face downward.
Note: Face the label of the battery pack downward
when inserting the battery pack.
(4) Info LED lights red and the LED on the cradle also
lights red, indicating the battery is being charged.
(5) Info LED turns off when the phone battery is fully
charged.
(6) The LED on the cradle lights green when both the
phone battery and the spare battery are fully
charged if a spare battery is also placed on the
cradle. If not, the LED light green when the phone
battery is fully charged.
connector
Info LED
LED
spare battery (option)
AC Adapter
AC Adapter Cable
C outlet
cradle (Battery Charger)
used for:
call indication
charger status
Used for indicating charge status.
An empty battery pack can be fully charged in
about three hours.
If any abnormality is found to the battery, the
LED on the cradle starts flashing. In this case,
please contact your network administrator.
TIP
01:AbcDefg
02:HigkLmn
03:OpqrStu
TIP
01:AbcDefg
02:HigkLmn
03:OpqrStu
To Next Page
Loading...
