NEC Univerge MH250 - To Release the Current Profile

72
- Press soft key.
- Select “02. Apply” to apply the selected profile.
- Press soft key.
- The display returns to the standby mode. The newly
selected profile is applied.
• TO RELEASE THE CURRENT
PROFILE
- Press soft key in standby mode to display
the Profile Menu.
- The currently applied profile is indicated by a *
mark.
- Press key to select the current applied profile in
the list and then press soft key.
- On the displayed menu, select “02. Release” to
release the current applied profile.
OK
PM 02:58
OK Back
Profile
01. Edit
02. Apply
03. Clear
OK
PM 02:58
OK
Profile
01. Edit
02. Apply
03. Clear
Sapporo Office
Apply Profile
is applied.
2007 Oct 01
PM 02:58
Sapporo Office
PM 02:58
Func Profile
new profile
Profile
PM 02:58
OK Back
Profile
01. Tokyo Office
*
02. Yokohama Office
03. Osaka Factory
04. Sapporo Office
05. Head Office
applied profile
OK
PM 02:58
OK Back
Profile
01. Apply
02. Release