NEC Univerge MH250 - 13 Profile; To Apply a Profile

71
13.PROFILE
A profile is a named collection of configuration settings
that should be edited by the network administrator. Up
to five profiles can be used. This section explains how
to apply an already assigned profile to the phone.
• TO APPLY A PROFILE
- Currently applied profile appears in standby mode
as follows.
- Press soft key in standby mode to display
the Profile Menu.
- The currently applied profile is indicated by a *
mark.
- Press key to select an appropriate profile in the
list. As an example, “04. Sapporo Factory” is
selected.
2007 Oct 01
PM 02:58
Tokyo Office
PM 02:58
Func Profile
profile
2007 Oct 01
PM 02:58
No profile
PM 02:58
Func Profile
when a profile is applied
when no profile is applied
Your network administrator usually knows
which profile should be applied. Please follow
his/her instructions when changing this data.
Profile
PM 02:58
OK Back
Profile
01. Tokyo Office
07. Presence
*
02. Yokohama Office
03. Osaka Factory
04. Sapporo Office
05. Head Office
applied profile
TIP
01:AbcDefg
02:HigkLmn
03:OpqrStu
PM 02:58
OK Back
Profile
01. Tokyo Office
*
02. Yokohama Office
03. Osaka Factory
04. Sapporo Office
05. Head Office
newly selected
profile