NEC Univerge MH250 - SPEED DIAL; TO USE SPEED DIAL

35
7. SPEED DIAL
The phone can use Speed Dial. Up to 10 entries (0 - 9)
are available.
• TO USE SPEED DIAL
Quick Operation:
- In standby mode, press a dial pad (
∼ ) to
select one speed dial entry that has already regis-
tered in the handset. For example, press to
make a call to “No3: 98765431” that is listed as
No.3 entry.
- Press key to make the call.
Normal Operation:
- Press soft key in standby mode to display
the main menu.
- Press key to select “03. Speed Dial”.
- Press soft key and then the handset dis-
plays a Speed Dial list.
- To make a call to “3, 98765431” for example, press
key and then press key twice.
Speed dialing digits take precedence over PBX-
programmed single-digit dialing. For instance, if
the single digit 0 was programmed in the PBX to
dial the operator, and an MH250 user’s speed
dial digit 0 was programmed to dial home, then
dialing 0 on the MH250 would dial home, not the
operator. If you desire to dial the operator, press
key first and then dial 0.
0 9
3
PM 02:58
Enter Back
Speed Dial
2. 82154112
3. 98765431
1. 54332
Func
4. 57777
5. 96745211
6.
7.
TIP
01:AbcDefg
02:HigkLmn
03:OpqrStu
Func
PM 02:58
OK Back
Menu
02. Phone Book
03. Speed Dial
01. Call Log
04. Setting
OK
PM 02:58
Enter Back
Speed Dial
2. 82154112
3. 98765431
1. 54332
Func
4. 57777
5. 96745211
6.
7.
3